TOP LEFT

If you need to convert your money use currency conversion Click on

BOTTOM LEFT

The Original Handle & Knob Shop Products are available in a variety of finishes that should give many years service, under normal circumstances. We recommend our products are cleaned using a soft cloth moistened with soapy water to remove any deposits or alternatively wiped over using a soft cloth with beeswax. UNDER NO CIRCUMSTANCES USE ANY FORM OF METAL CLEANER, AEROSOL SPRAYS OR SOLVENT BASED PRODUCTS.

DIMENSIONS/SPECIFICATIONS

Cupboard Knobs

All cupboard knob dimensions are metric (mm), and show the knob and the rose size. This information is important when fitting knobs to a narrow door stile, or when a rose detail may overlap on drawer panel detail.

Pull Handles

All cabinet pull handle dimensions are shown in metric (mm), and show bolt centres (c/c) and projection. This information is important for accurate fitting, or where specifications may demand a minimum distance between cabinet face and handle for ease of use.

Fixings

All knobs and handles are supplied with M4 threaded bolts as standard. When it is desirable to fit a knob without the bolt showing from the back, we would suggest using an FTD845 dowel screw. This allows for blind fixing by drilling a pilot hole in the front of the drawer/door, then carefully screwing the cupboard knob in place.